filter-policy (BGP-IPv6 unicast address family view)

Format

filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name | acl6-name acl6-name } { import | export [ direct | isis process-id | ospfv3 process-id | ripng process-id | static | unr ] }

undo filter-policy [ acl6-number | ipv6-prefix ipv6-prefix-name | acl6-name acl6-name ] { import | export [ direct | isis process-id | ospfv3 process-id | ripng process-id | static | unr ] }

Parameters

Parameter	Description	Value
acl6-number	Specifies the number of a basic ACL6.	The value is an integer that ranges from 2000 to 2999.
ipv6-prefix ipv6-prefix-name	Specifies the name of an IPv6 prefix list.	The name is a string of 1 to 169 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.
acl6-name acl6-name	Specifies the name of a named basic ACL6.	The value is a string of 1 to 64 case-sensitive characters without spaces. The value must start with a letter (a to z or A to Z, case sensitive).
direct	Configures a device to filter the direct routes to be advertised.	-
isis process-id	Specifies the ID of an IS-IS process.	The value is an integer ranging from 1 to 4294967295.
ospfv3 process-id	Specifies the ID of an OSPFv3 process.	The value is an integer ranging from 1 to 4294967295.
ripng	Specifies the RIPng.	The value is an integer ranging from 1 to 4294967295.
static	Configures a device to filter the static routes to be advertised.	-
unr	Configures a device to filter the UNR routes to be advertised.	-

Views

BGP-IPv6 unicast address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

The filter-policy export command takes effect on the routes to be advertised by BGP. BGP filters the routes that are imported using the import-route command. After the command is run, only the routes that match the export policy can be added to the local BGP routing table and advertised by BGP.

The filter-policy import command is used to filter the routes received by BGP so that BGP adds only desired routes to the BGP routing table.

If protocol is specified, only the routes imported from the specified protocol will be filtered. If protocol is not specified, the routes imported from all protocols will be filtered.

If rules are configured for a named ACL using the rule command, only the source address range specified by source and the time period specified by time-range are valid.

Configuration Impact

If the filter-policy import command runs more than once, the latest configuration overrides the previous one.

If the filter-policy export command with the same protocol specified is run more than once, the latest configuration overrides the previous one.

Precautions

The filter-policy export command is mutually exclusive with the route-filter export command.

The filter-policy import command is mutually exclusive with the route-filter import command.

Example

# Use ACL 2000 to filter all the routes to be advertised by BGP.

<HUAWEI> system-view
[~HUAWEI] acl 2000
[*HUAWEI-acl4-basic-2000] quit
[*HUAWEI] bgp 100
[*HUAWEI-bgp] ipv6-family unicast
[*HUAWEI-bgp-af-ipv6] filter-policy 2000 import