filter-list vni

Function

The filter-list vni command creates a VNI list and display the VNI list view.

The undo filter-list vni command deletes a VNI list.

By default, no VNI list is created.

Format

filter-list vni name

undo filter-list vni name

Parameters

Parameter	Description	Value
name	Specifies a VNI list name.	The value is a string of 1 to 63 case-sensitive characters. It cannot contain spaces.

Parameter

Description

Value

name

Specifies a VNI list name.

The value is a string of 1 to 63 case-sensitive characters. It cannot contain spaces.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
route-base	write

Usage Guidelines

Usage Scenario

VNIs, similar to VLAN IDs, differentiate virtual extensible local area network (VXLAN) segments and identify tenants. A VNI represents one tenant, even if multiple terminal users share the same VNI. To create a VNI list, run the filter-list vni command. The VNI list can be applied to an if-match clause to filter EVPN routes.

Follow-up Procedure

Run the vni command in the VNI list view to add VNIs for the list.

Example

# Create a VNI list named vni-list.

<HUAWEI> system-view
[~HUAWEI] filter-list vni vni-list