flexe client-instance

Function

The flexe client-instance command creates a FlexE client and enters the created FlexE client.

The undo flexe client-instance command deletes the FlexE client.

By default, no FlexE client is created.

This command is supported only on the NetEngine 8000 F2A.

flexe client-instance clientindex [ flexe-group groupindex flexe-type { cross | full-function } [ port-id portid ] ]

undo flexe client-instance clientindex

Parameter	Description	Value
clientindex	Specifies the index of FlexE client.	The value is an integer that ranges from 1 to 2147483647.
flexe-group groupindex	Specifies the index of FlexE group.	The value is an integer that ranges from 1 to 2147483647.
flexe-type	FlexE type.	-
cross	FlexE cross type.	-
full-function	FlexE full function type.	-
port-id portid	Specifies the id of FlexE port.	The value is an integer that varies according to subcards.

System view

2: Configuration level

Task Name	Operations
device-mgr	write

Usage Scenario

The flexe client-instance command is used to create a FlexE client or enter the created FlexE client.

# Delete the created FlexE client 1.

<HUAWEI> system-view
[~HUAWEI] undo flexe client-instance 1

# Enter the created FlexE client 1.

<HUAWEI> system-view
[~HUAWEI] flexe client-instance 1

# Create FlexE client 1 on FlexE group 12.

<HUAWEI> system-view
[~HUAWEI] flexe client-instance 1 flexe-group 12 flexe-type full-function