frame-ip lease manage

Function

The frame-ip lease manage command enables the lease management function of IP addresses delivered by the RADIUS server in an IP address pool.

The undo frame-ip lease manage command restores the default setting.

By default, the lease management function of IP addresses delivered by the RADIUS server is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format

frame-ip lease manage

undo frame-ip lease manage

Parameters

None

Views

IP address pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ippool	write

Usage Guidelines

Usage Scenario

When the device needs to allocate IP addresses to users using the RADIUS server, configure the frame-ip lease manage command to enable the lease management function of IP addresses delivered by the RADIUS server.

Configuration Impact

After the frame-ip lease manage command is configured, the lease management function of IP addresses delivered by the RADIUS server is enabled. If the RADIUS delivers IP addresses with a lease, the delivered lease takes effect. If the RADIUS server only delivers IP addresses, the lease configured using the lease command in the IP address pool takes effect.

Precautions

In VS mode, this command is supported only by the admin VS.

This command can only be configured in the local IP address pool and applies only to IP addresses of Layer 2 common DHCP users delivered by the RADIUS server.

Example

# Enable the lease management function of IP addresses delivered by the RADIUS server in an IP address pool.

<HUAWEI> system-view
[~HUAWEI] ip pool huawei bas local
Info: It's successful to create an IP address pool
[*HUAWEI-ip-pool-huawei] commit
[~HUAWEI-ip-pool-huawei] frame-ip lease manage