ftp server ip-block reactive

Function

The ftp server ip-block reactive command sets a period after which the system automatically unlocks an ipv4 and ipv6 address of user.

The undo ftp server ip-block reactive command restores the default period.

By default, the period is 5 minutes.

Format

ftp server ip-block reactive reactive-period

undo ftp server ip-block reactive [ reactive-period ]

Parameters

Parameter	Description	Value
reactive-period	Specifies a period after which the system automatically unlocks an IP address of user.	The value is an integer ranging from 1 to 1000, in minute.

Parameter

Description

Value

reactive-period

Specifies a period after which the system automatically unlocks an IP address of user.

The value is an integer ranging from 1 to 1000, in minute.

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
ftp-server	write

Usage Guidelines

To set a period after which the system automatically unlocks an IP address of user, run the ftp server ip-block reactive command. A locked IP address of user cannot access the device through FTP. The system automatically unlocks the IP address of user until the unlocking period expires. This improves device security.

To manually unlock the IP address of user, run the activate ftp server ip-block ip-address command.

Example

# Set the period after which the system automatically unlocks the IP address of user to 50 minutes.

<HUAWEI> system-view
[~HUAWEI] ftp server ip-block reactive 50