measure

Function

The measure command configures the counter of a generalflow test instance.

The undo measure command restores the counter of a generalflow test instance to the default value.

By default, no counter of a generalflow test instance is configured.

measure { throughput | delay | loss }

undo measure

Parameter	Description	Value
throughput	Indicates a throughput test.	-
delay	Indicates a delay test.	-
loss	Indicates a packet loss ratio test.	-

Parameter

Description

Value

throughput

Indicates a throughput test.

delay

Indicates a delay test.

loss

Indicates a packet loss ratio test.

NQA view

2: Configuration level

Task Name	Operations
sla	write

Usage Scenario

To configure the counter of a generalflow test instance, run the measure command. The following counters can be used:

Throughput: maximum number of bits that can be sent along a link every second. The value is expressed in kbit/s.
Packet loss ratio: percentage of discarded packets to all sent packets.
Delay: time elapsed when a test packet is sent and returned. The value is expressed in microseconds.

Prerequisites

The measure command can only be used for generalflow test instances.

Follow-up Procedure

Configure other test parameters in specific test scenarios.

Precautions

You cannot change this configuration of a running test instance.

# Set the counter of a generalflow test instance to throughput.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type generalflow
[*HUAWEI-nqa-user-test] measure throughput