graceful-restart timer wait-for-rib (BGP view)

Function

The graceful-restart timer wait-for-rib command sets the maximum duration for a BGP restarter to wait for the End-of-RIB flag from each peer.

The undo graceful-restart timer wait-for-rib command deletes the configured duration.

By default, a BGP restarter waits for the End-of-RIB flag from each peer for a maximum of 600s.

Format

graceful-restart timer wait-for-rib time

undo graceful-restart timer wait-for-rib

Parameters

Parameter	Description	Value
time	Specifies the maximum duration for a BGP restarter to wait for the End-of-RIB flag from each peer.	The value is an integer ranging from 3 to 3000, in seconds.

Parameter

Description

Value

time

Specifies the maximum duration for a BGP restarter to wait for the End-of-RIB flag from each peer.

The value is an integer ranging from 3 to 3000, in seconds.

Views

BGP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

To set the maximum duration for a BGP restarter to wait for the End-of-RIB flag from each peer, run the graceful-restart timer wait-for-rib command. After the BGP session between the BGP restarter and any peer is reestablished, if the BGP restarter does not receive the End-of-RIB flag from this peer within the specified duration, the BGP session on the device exits from the GR process, and the device selects the optimal route among reachable routes.

Configuration Impact

If the graceful-restart timer wait-for-rib command is run more than once, the latest configuration overrides the previous one.

Precautions

If there are a large number of routes, setting time to a large value is recommended.

Example

# Set the maximum duration to 100s for a BGP restarter to wait for the End-of-RIB flag from each peer.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] graceful-restart timer wait-for-rib 100