peer advertise-community (BGP-IPv6 MVPN address family view) (group)

Function

The peer advertise-community command configures a device to advertise a community attribute to its peer group.

The undo peer advertise-community command cancels the existing configuration.

By default, a device advertises no community attribute to its peer or peer group.

Format

peer group-name advertise-community

undo peer group-name advertise-community

Parameters

Parameter	Description	Value
group-name	Specifies the name of a peer group.	The name is a string of 1 to 47 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

group-name

Specifies the name of a peer group.

The name is a string of 1 to 47 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Views

BGP-IPv6 MVPN address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

The peer advertise-community command is used to configure a device to advertise a community attribute to its peer or peer group. If a device advertises a community attribute to its peer group, all the members of the peer group will inherit the configuration. This simplifies the application of routing policies and facilitates route maintenance and management.

Precautions

Before running the peer advertise-community command to advertise BGP community attributes, you can use a routing policy to define specific community attributes.

Example

# Configure a device to advertise a community attribute to its peer group.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] group test external
[*HUAWEI-bgp] ipv6-family mvpn
[*HUAWEI-bgp-af-mvpnv6] peer test enable
[*HUAWEI-bgp-af-mvpnv6] peer test advertise-community