peer signaling vpls-ad disable (BGP-L2VPN-AD address family view) (group)

Function

The peer signaling vpls-ad disable command disables BGP AD signaling mode for a specified peer group.

The undo peer signaling vpls-ad disable command restores the default signaling mode of a specified peer group.

By default, after the peer enable command is run in the L2VPN AD address family view, the BGP AD signaling mode is enabled for all peers or peer groups.

Format

peer group-name signaling vpls-ad disable

undo peer group-name signaling vpls-ad disable

Parameters

Parameter	Description	Value
group-name	Specifies the name of a peer group.	The name is a string of 1 to 47 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.
vpls-ad	Disables BGP AD signaling mode for a specified peer group.	-

Parameter

Description

Value

group-name

Specifies the name of a peer group.

The name is a string of 1 to 47 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

vpls-ad

Disables BGP AD signaling mode for a specified peer group.

Views

BGP-L2VPN-AD address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

In BGP VPLS scenarios, configure the signaling mode for peers or peer groups in the L2VPN AD address family view so that peers can advertise routes to each other. The parameters used in different scenarios are described as follows:

In the BGP VPLS scenario, configure vpls in the peer signaling command.
In the BGP AD VPLS scenario, the BGP AD signaling is enabled for all peers or peer groups in the L2VPN AD address family view by default.

Prerequisites

A peer group has been created using the peer enable command.

Precautions

The signaling mode configured for a peer is preferred over that configured for the peer group to which the peer belongs. When a signaling mode is configured for a peer group but not configured for a peer that belongs to the peer group, the peer uses the signaling mode configured for its peer group.

Example

# Disable the BGP AD signaling capability of peer group aaa in the L2VPN AD address family view.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] group aaa internal
[*HUAWEI-bgp] l2vpn-ad-family
[*HUAWEI-bgp-af-l2vpn-ad] peer aaa enable
[*HUAWEI-bgp-af-l2vpn-ad] peer aaa signaling vpls-ad disable