hold-up

Function

The hold-up command enables an interface to stay in the delayed Up state.

The undo hold-up command removes the configuration.

By default, an interface does not stay in the delayed Up state.

Format

hold-up

undo hold-up

Parameters

None

Views

100GE interface view, 10G LAN interface view, 10G WAN interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE interface view, FlexE-100G interface view, FlexE-400G interface view, FlexE-50G interface view, FlexE interface view, GE optical interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
device-mgr	write

Usage Guidelines

Usage Scenario

For a GE interface, when a generalflow test is performed in Layer 2 Ethernet forwarding, IP forwarding, L2VPN (VLL/VPLS), or L3VPN scenarios, run the hold-up command to enable the interface to stay in the delayed Up state, so that the generalflow test can be properly performed.

Configuration Impact

The interface status does not change with alarm functions. The interface remains delayed Up even if the interface is not connected to cables, and the link indicator is always on.

Precautions

The hold-up command can be run only on a GE interface on which a generalflow test is performed. Before you run the hold-up command on a physical interface, ensure that the interface staying in the delayed Up state does not affect services.

Example

# Enable GE0/1/10 to remain delayed Up.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet0/1/10
[~HUAWEI-GigabitEthernet0/1/10] hold-up