Usage Scenario
When a jitter test instance is used to monitor VoIP services, to set the number of the packets sent each time in a probe, run the jitter-packetnum command. The test simulates actual traffic within a specified period of time.
The
jitter-codec command can also be used to simulate VoIP services. The
jitter-packetnum command with a parameter configured, however, can implement more finely granular simulation. In addition, the
jitter-packetnum command sets the number of packets to be sent for all services, which is widely applied.
Configuration Impact
If a code type has been configured, running the jitter-packetnum command overrides the configured code type.
Precautions
If parameters need to be changed during the running of the test instance, the system prompts you whether to terminate the test instance. Press "Y" or "N" as required.
- If you press "Y", the test instance is terminated and parameters changed. The settings take effect after being committed. To restart the test instance, run the start command.
- If you press "N", the test instance keeps running, and the parameters fail to be modified.