if-match source-port

Function

The if-match source-port command configures a filtering rule based on the source port number.

The undo if-match source-port command deletes the filtering rule based on the source port number.

By default, no filtering rule based on the source port number is configured.

Format

if-match source-port { greater-than | less-than | equal } port

if-match source-port greater-than port less-than upper-port-value

undo if-match source-port

undo if-match source-port { greater-than | less-than | equal } port

undo if-match source-port greater-than port less-than upper-port-value

Parameters

Parameter	Description	Value
greater-than	Indicates that the source port number is greater than the specified one.	-
less-than	Indicates that the source port number is smaller than the specified one.	-
equal	Indicates that the source port number is equal to the specified one.	-
port	Specifies the source port number of the traffic.	The value is an integer ranging from 0 to 65535.
upper-port-value	Specifies the upper limit of a source port number.	The value is an integer ranging from 0 to 65535.

Views

Flow-Route IPv6 VPN instance view, Flow-Route VPN instance view, Flow-Route-IPv6 view, Flow-Route view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
flow-route	write

Usage Guidelines

Usage Scenario

The if-match source-port command is used to configure a filtering rule based on the source port number for a BGP (IPv6) Flow Specification route or BGP (IPv6) VPN Flow Specification route. Traffic matching the filtering rule will be controlled with the action specified by the apply clause.

Prerequisites

A static BGP (IPv6) Flow Specification route or BGP (IPv6) VPN Flow Specification route has been created using the flow-route command in the system view.

Precautions

Make sure that the source port number is within the range, because if the source port number is beyond the range, protocol packets sent by the source port cannot be forwarded.

A maximum of five filtering rules based on the source port number can be configured for a BGP Flow Specification route.

Example

# Configure a filtering rule that is based on the source port number of 179 for the static BGP IPv6 Flow Specification route Rule 1.

<HUAWEI> system-view
[~HUAWEI] flow-route Rule1 ipv6
[*HUAWEI-flow-route-ipv6] if-match source-port equal 179

# Configure a filtering rule that is based on a source port number range for the static BGP Flow Specification route Rule1.

<HUAWEI> system-view
[~HUAWEI] flow-route Rule1 vpn-instance va
[*HUAWEI-flow-route-va] if-match source-port greater-than 150 less-than 200

# Configure a filtering rule that is based on the source port number of 179 for the static BGP Flow Specification route Rule 1.

<HUAWEI> system-view
[~HUAWEI] flow-route Rule1
[*HUAWEI-flow-route] if-match source-port equal 179