link-state down-delay-time

Function

The link-state down-delay-time command sets a period that an Eth-Trunk interface waits before changing its state to Down.

The undo link-state down-delay-time command deletes the period that an Eth-Trunk interface waits before changing its state to Down.

By default, a Down Eth-Trunk interface changes its state to Down immediately without any delay.

Format

link-state down-delay-time delay-value

undo link-state down-delay-time [ delay-value ]

Parameters

Parameter	Description	Value
delay-value	Specifies a period that an Eth-Trunk interface waits before changing its state to Down.	The value is a multiple of 100, ranging from 0 to 1000, in milliseconds.

Parameter

Description

Value

delay-value

Specifies a period that an Eth-Trunk interface waits before changing its state to Down.

The value is a multiple of 100, ranging from 0 to 1000, in milliseconds.

Views

Eth-Trunk interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
interface-mgr	write

Usage Guidelines

Usage Scenario

To set a period that an Eth-Trunk interface waits before changing its state to Down, run the link-state down-delay-time command in the Eth-Trunk interface view. The Eth-Trunk interface then changes its state to Down after the period elapses.

Precautions

After an Eth-Trunk interface is shut down using the shutdown command, the link-state down-delay-time command does not take effect for this interface.

Example

# Configure Eth-Trunk 1 to wait for 800 ms before changing its state to Down.

<HUAWEI> system-view
[~HUAWEI] interface Eth-Trunk 1
[*HUAWEI-Eth-Trunk1] link-state down-delay-time 800