interval (ifit-instance view)

Function

The interval command sets a measurement interval for an iFIT instance.

The undo interval command restores the default measurement interval for an iFIT instance.

By default, the measurement interval for an iFIT instance is 30 second.

Format

interval interval-value

undo interval [ interval-value ]

Parameters

Parameter	Description	Value
interval-value	Specifies a measurement interval for an iFIT instance.	The value can be 10, 30, 60, or 300, in seconds.

Parameter

Description

Value

interval-value

Specifies a measurement interval for an iFIT instance.

The value can be 10, 30, 60, or 300, in seconds.

Views

IFIT-instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ifit	write

Usage Guidelines

Usage Scenario

A measurement interval for an iFIT instance is the period between starting to count the number of packets or bytes and recording the send and receive timestamps.

To implement iFIT performance statistics and ensure measurement accuracy, run the interval command to set a measurement interval for an iFIT instance based on the clock offset, maximum transmission delay, and system performance.

Prerequisites

An iFIT instance has been created.

Example

# Set a measurement interval to 60 seconds for an iFIT instance named abc.

<HUAWEI> system-view
[~HUAWEI] ifit
[*HUAWEI-ifit] instance abc
[*HUAWEI-ifit-instance-abc] interval 60