mpls rsvp-te (Interface view)

Function

The mpls rsvp-te command in the interface view enables RSVP-TE on an interface.

The undo mpls rsvp-te command disables RSVP-TE. The command run in the MPLS view disables RSVP-TE on all interfaces.

By default, an interface does not belong to any RSVP instance.

Format

mpls rsvp-te

undo mpls rsvp-te

Parameters

None

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, GE optical interface view, GE sub-interface view, GE electrical interface view, GMPLS-UNI interface view, Tunnel interface view, XGE sub-interface view, XGE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

This command is used to enable the RSVP-TE capability of an interface.

Prerequisites

Enable MPLS and MPLS TE on the interface.

Example

# Enable RSVP-TE.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] mpls
[*HUAWEI-GigabitEthernet0/1/0] mpls te
[*HUAWEI-GigabitEthernet0/1/0] mpls rsvp-te