igmp version

Function

The igmp version command configures an IGMP version on an interface.

The undo igmp version command restores the default setting.

By default, an interface runs IGMPv2.

Format

igmp version VersionValue

undo igmp version

Parameters

Parameter	Description	Value
VersionValue	Specifies an IGMP version to be run on an interface.	The value can be 1, 2, or 3. 1:IGMPv1 2:IGMPv2 3:IGMPv3

Parameter

Description

Value

VersionValue

Specifies an IGMP version to be run on an interface.

The value can be 1, 2, or 3.

1:IGMPv1
2:IGMPv2
3:IGMPv3

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 200GE sub-interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE sub-interface view, GE interface view, GE electrical interface view, Global VE sub-interface view, Loopback interface view, PW-VE sub-interface view, Tunnel interface view, VBDIF interface view, VE sub-interface view, VLANIF interface view, Virtual template view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
igmp	write

Usage Guidelines

Usage Scenario

The Router interfaces on a subnet must run the same IGMP version. Otherwise, they cannot communicate.

An IGMP version cannot automatically change to another version.

Example

# Configure IGMPv1 on GE 0/1/0.

<HUAWEI> system-view
[~HUAWEI] multicast routing-enable
[*HUAWEI] interface GigabitEthernet 0/1/0
[*HUAWEI-GigabitEthernet0/1/0] undo portswitch
[*HUAWEI-GigabitEthernet0/1/0] igmp version 1