igmp-snooping static-router-port vsi (interface view)

Function

The igmp-snooping static-router-port vsi remote-peer command configures a static router port.

The undo igmp-snooping static-router-port vsi remote-peer command cancels the configuration.

By default, a dynamic router port is used.

Format

igmp-snooping static-router-port vsi vsi-name

undo igmp-snooping static-router-port vsi vsi-name

Parameters

Parameter	Description	Value
vsi-name	Specifies a VSI.	The vsi-name value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

vsi-name

Specifies a VSI.

The vsi-name value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 200GE sub-interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, FlexE sub-interface view, FlexE interface view, GE optical interface view, GE sub-interface view, GE interface view, GE electrical interface view, Global VE sub-interface view, VE sub-interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2mc	write

Usage Guidelines

Usage Scenario

If user hosts need to receive multicast data packets from a port for a long period of time, the igmp-snooping static-router-port vsi command can be used to configure the port as a static router port.

Static router ports can be configured on different positions on a network to enable user hosts to regularly receive data for specific multicast groups or source-specific multicast groups. The commands listed in the following table can be run in any order. Run one or more commands as required to configure static router ports. For details, see Table Description of the igmp-snooping static-router-port vsi command in different scenarios.

Prerequisites

IGMP snooping has been configured globally and in a VSI.

Configuration Impact

A static router port does not age. To delete a static router port, you must run the undo igmp-snooping static-router-port vsi command.

If the igmp-snooping static-router-port vsi command is run more than once, all configurations take effect.

Example

# Configure GE 0/1/1.1 as a static router port in a VSI named vpna.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] vsi vpna
[*HUAWEI-vsi-vpna] pwsignal ldp
[*HUAWEI-vsi-vpna-ldp] vsi-id 1
[*HUAWEI-vsi-vpna-ldp] quit
[*HUAWEI-vsi-vpna] quit
[*HUAWEI] interface GigabitEthernet0/1/1.1
[*HUAWEI-GigabitEthernet0/1/1.1] l2 binding vsi vpna
[*HUAWEI-GigabitEthernet0/1/1.1] igmp-snooping static-router-port vsi vpna