igmp-snooping report-listening user-info delete-delay

Function

The igmp-snooping report-listening user-info delete-delay command sets a delay in deleting user information on QinQ stacking and mapping sub-interfaces of a specified VSI.

The undo igmp-snooping report-listening user-info delete-delay command restores the default setting.

By default, the delay in deleting user information on QinQ sub-interfaces is 70 seconds.

Format

igmp-snooping report-listening user-info delete-delay delay-time

undo igmp-snooping report-listening user-info delete-delay

Parameters

Parameter	Description	Value
delay-time	Specifies a delay in deleting user information.	The value is an integer ranging from 0 to 300, in seconds. The default value is 70.

Parameter

Description

Value

delay-time

Specifies a delay in deleting user information.

The value is an integer ranging from 0 to 300, in seconds. The default value is 70.

Views

VSI-AUTO view, VSI-DEFAULT view, VSI-STATIC view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2mc	write

Usage Guidelines

Usage Scenario

To delay user information deletion in a VSI, run the igmp-snooping report-listening user-info delete-delay command. After the command is run, user information can be deleted only after the specified delay expires, preventing multicast data traffic interruptions in interface resets or other conditions.

Example

# Set a delay in deleting user information of a specified VSI.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] vsi vsi1
[*HUAWEI-vsi-vsi1] pwsignal ldp
[*HUAWEI-vsi-vsi1-ldp] vsi-id 200
[*HUAWEI-vsi-vsi1-ldp] quit
[~HUAWEI-vsi-vsi1] igmp-snooping report-listening user-info delete-delay 100