increase-priority

Function

The increase-priority command increases the priority of the redirection action configured in the MF classification.

The undo increase-priority command cancels the increased priority of the redirection action configured in the MF classification.

By default, if traffic matches the MF classification, and BGP FlowSpec rules simultaneously and the actions are redirection, the redirection action takes effect based on the BGP FlowSpec service.

Format

increase-priority

undo increase-priority

Parameters

None

Views

Traffic behavior view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

If traffic matches the MF classification, and BGP FlowSpec rules simultaneously and the actions are redirection, you can run this command to make the redirection action take effect based on the MF classification service.

Example

# Increase the priority of the redirection action configured in the MF classification.

<HUAWEI> system-view
[~HUAWEI] traffic behavior b1
[*HUAWEI-behavior-b1] increase-priority