ip netstream export sequence-mode flow

Function

The ip netstream export sequence-mode flow command configures NetStream packets to carry the packet sequence field or the flow sequence field.

The undo ip netstream export sequence-mode flow command restores the default setting.

By default, NetStream packets carry the packet sequence field.

Format

ip netstream export sequence-mode flow

undo ip netstream export sequence-mode flow

Parameters

None

Views

Slot view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
netstream	write

Usage Guidelines

Usage Scenario

NetStream packets can be exported in the V5, V8, V9, or IPFIX format. NetStream packets exported in the V5 or V8 format carry the flow sequence field, recording the sequence number of flows; NetStream packets exported in the V9 format carry the packet sequence field, recording the sequence number of packets. The command apply to the V9 format only. To configure NetStream packets to carry the flow sequence field, run the ip netstream export sequence-mode command.

Precautions

VSn has no slot view. Therefore, the output address configured in the slot view of Admin-VS takes effect in VSn.

The ip netstream sampler to slot command can be configured only on a physical system (PS).

Example

# Configure NetStream packets to carry the flow sequence field.

<HUAWEI> system-view
[~HUAWEI] slot 1
[*HUAWEI-slot-1] ip netstream export sequence-mode flow