ipv4-family sr-policy

Function

The ipv4-family sr-policy command enables the BGP IPv4 SR-MPLS TE Policy address family and displays the address family view.

The undo ipv4-family sr-policy command deletes all the configurations in the BGP IPv4 SR-MPLS TE Policy address family view.

By default, the BGP IPv4 SR-MPLS TE Policy address family is not enabled.

Format

ipv4-family sr-policy

undo ipv4-family sr-policy

Parameters

None

Views

BGP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

SR-MPLS TE Policy is a tunneling technology developed based on SR. An SR-MPLS TE Policy route dynamically generated by a controller needs to be transmitted to a forwarder through BGP extension. This function is implemented through the newly defined BGP SR-MPLS TE Policy subsequent address family identifier (SAFI). By establishing a BGP IPv4 SR-MPLS TE Policy address family-specific peer relationship between the controller and forwarder, this function enables the controller to deliver the SR-MPLS TE Policy route to the forwarder.

By default, the forwarder does not advertise the preferentially selected SR-MPLS TE Policy route to EBGP peers. You can run the advertise ebgp enable command to enable the forwarder to advertise the SR-MPLS TE Policy route to EBGP peers. After an SR-MPLS TE Policy is created using the SR-MPLS TE Policy route, different types of routes, such asVPN routesand public BGP routes, can be recursed to the SR-MPLS TE Policy.

Before you configure the BGP IPv4 SR-MPLS TE Policy address family, run the ipv4-family sr-policy command in the BGP view to enable the address family and enter the address family view.

Example

# Enable the BGP IPv4 SR-MPLS TE Policy address family and display the address family view.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] ipv4-family sr-policy