ipv6-family flow

Function

The ipv6-family flow command enables a BGP-Flow IPv6 address family and displays the address family view.

The undo ipv6-family command deletes the BGP-Flow IPv6 address family view.

By default, the BGP-Flow IPv6 address family is not enabled.

Format

ipv6-family flow

undo ipv6-family flow

Parameters

None

Views

BGP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

Before performing BGP configurations in BGP-Flow IPv6 address family view, you must run the ipv6-family flow command in the BGP view to enable the BGP-Flow IPv6 address family, and then enter the BGP-Flow IPv6 address family view.

Configuration Impact

After the ipv6-family flow command is run, the created BGP IPv6 Flow Specification route is imported to the BGP routing table.

Precautions

Running the undo ipv6-family flow command can delete all configurations from the BGP-Flow IPv6 address family view and the BGP IPv6 Flow Specification route from the BGP routing table.

Example

# Display the BGP-Flow IPv6 address family view.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] ipv6-family flow
[*HUAWEI-bgp-af-ipv6-flow]