ipv6 address auto link-local

Function

The ipv6 address auto link-local command enables the generation of a link-local address for an interface.

The undo ipv6 address auto link-local command cancels the configuration.

By default, no link-local addresses are generated automatically for an interface.

Format

ipv6 address auto link-local

undo ipv6 address auto link-local

Parameters

None

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 200GE sub-interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE sub-interface view, GE interface view, GE electrical interface view, Global VE sub-interface view, Loopback interface view, PW-VE sub-interface view, PW-VE interface view, Tunnel interface view, VBDIF interface view, VE sub-interface view, VLANIF interface view, XGE interface view, Management interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
interface-mgr	write

Usage Guidelines

Usage Scenario

If an automatically allocated link-local address has already been configured on an interface, the ipv6 address link-local configuration overrides the existing link-local address.

Example

# Configure a link-local address automatically generated for an interface.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/1
[~HUAWEI-GigabitEthernet0/1/1] ipv6 enable
[*HUAWEI-GigabitEthernet0/1/1] ipv6 address auto link-local