isis timer lsp-throttle

Function

The isis timer lsp-throttle command sets the minimum interval at which LSPs are sent on an IS-IS interface and the maximum number of LSPs to be sent each time.

The undo isis timer lsp-throttle command restores the default setting.

By default, the minimum interval at which LSPs are sent on an interface is 50 milliseconds, and the maximum number of LSPs to be sent each time is 10.

Format

isis timer lsp-throttle throttle-interval [ count count ]

undo isis timer lsp-throttle

Parameters

Parameter Description Value
throttle-interval

Specifies the minimum interval at which LSPs are sent.

The value ranges from 1 to 10000, in milliseconds.

count count

Specifies the maximum number of LSPs to be sent each time.

The value ranges from 1 to 1000.

Views

100GE interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE electrical interface view, GMPLS-UNI interface view, Global VE sub-interface view, Loopback interface view, Tunnel interface view, VBDIF interface view, VE sub-interface view, VE interface view, VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
isis write

Usage Guidelines

Usage Scenario

You can specify throttle-interval in the isis timer lsp-throttle command to set the delay between two successive LSPs and the interval at which fragments of a CSNP are sent.

Example

# Set the interval at which LSPs are sent on GE 0/1/0 to 500 milliseconds.
<HUAWEI> system-view
[~HUAWEI] isis 1
[*HUAWEI-isis-1] quit
[*HUAWEI] interface GigabitEthernet0/1/0
[*HUAWEI-GigabitEthernet0/1/0] isis enable 1
[*HUAWEI-GigabitEthernet0/1/0] isis timer lsp-throttle 500
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >