statistic enable mode

Function

The statistic enable mode command enables statistics collection on an Layer 2 sub-interface.

The undo statistic enable mode command disables statistics collection from an Layer 2 sub-interface.

By default, the traffic statistics collection function is disabled on a sub-interface.

Format

statistic enable mode { single | multiple }

undo statistic enable

Parameters

Parameter	Description	Value
single	Indicates the single mode, in which statistics are collected based on a specific Layer 2 sub-interface.	-
multiple	Indicates the multiple mode in which statistics are collected based on sub-interface+VLAN tag. Either a single VLAN tag or both an inner VLAN tag and an outer VLAN tag can be specified.	-

Parameter

Description

Value

single

Indicates the single mode, in which statistics are collected based on a specific Layer 2 sub-interface.

multiple

Indicates the multiple mode in which statistics are collected based on sub-interface+VLAN tag. Either a single VLAN tag or both an inner VLAN tag and an outer VLAN tag can be specified.

Views

400GE Layer 2 sub-interface view, 50GE Layer 2 sub-interface view, Eth-Trunk Layer 2 sub-interface view, GE Layer 2 sub-interface view, Global-VE layer2 subinterface view, VE layer2 subinterface view, Layer 2 sub-interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
interface-mgr	write

Usage Guidelines

Usage Scenario

To collect the number of packets that an Layer 2 sub-interface forwards, run the statistic enable mode command.

Example

# Enable statistics collection on GE 0/1/0.1.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0.1 mode l2
[*HUAWEI-GigabitEthernet0/1/0.1] statistic enable mode single