l2vpn-ad-family

Function

The l2vpn-ad-family command displays the BGP L2VPN AD address family view.

The undo l2vpn-ad-family command deletes all configurations in the BGP L2VPN AD address family view.

By default, the L2VPN AD address family view is disabled.

Format

l2vpn-ad-family

undo l2vpn-ad-family

Parameters

None

Views

BGP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

BGP AD VPLS shares a TCP connection with BGP. Most BGP AD VPLS configurations are the same as BGP configurations. Unlike BGP, BGP AD VPLS requires the exchange of VPLS member information between BGP peers. Therefore, BGP peers need to be enabled to exchange VPLS member information in the BGP L2VPN AD address family view.

The L2VPN AD address family view is displayed after the l2vpn-ad-family command is run.

After the BGP L2VPN AD address family view is displayed, BGP peers need to be enabled to exchange VPLS member information.

Prerequisites

BGP peers have been configured in the BGP view, and basic BGP functions have been configured on the peers.

Follow-up Procedure

Run the peer enable command in the L2VPN AD address family view to enable the exchange of VPLS member information.

Example

# Display the BGP L2VPN AD address family view.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] l2vpn-ad-family