bind slot(LNS group view)

Function

The bind slot command binds the tunnel board with the LNS backup group.

The undo bind slot command unbinds the tunnel board from the LNS backup group.

By default, no tunnel board is bound to any LNS backup group.

This command is supported only on the NetEngine 8000 F1A.

Format

bind slot slot_id

undo bind slot slot_id

Parameters

Parameter	Description	Value
slot_id	Specifies the slot number of the tunnel.	The value is a string of 1 to 15 case-sensitive characters, spaces not supported.

Parameter

Description

Value

slot_id

Specifies the slot number of the tunnel.

The value is a string of 1 to 15 case-sensitive characters, spaces not supported.

Views

LNS group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

You can configure multiple tunnel boards and specify the tunnel boards used by an LNS group. Multiple tunnel boards can be bound to an LNS group. These tunnel boards bear the load in turn based on tunnels.

Example

# Bind the tunnel board in slot 1 with the backup group backgroup.

<HUAWEI> system-view
[~HUAWEI] lns-group backgroup
[*HUAWEI-lns-group-backgroup] bind slot 1