load-balancing ignore-esi

Function

The load-balancing ignore-esi command configures disables a device from checking ESI validity when an EVPL instance load balancing is performed.

The undo load-balancing ignore-esi command restores the default configuration.

By default, a device checks ESI validity when an EVPL instance load balancing is performed.

Format

load-balancing ignore-esi

undo load-balancing ignore-esi

Parameters

None

Views

EVPL view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

When active-active protection is deployed in the EVPN VPWS scenario, if an access device is single-homed to an aggregation device, no ESI is configured on the access interface. To form active-active load balancing, you can run the load-balancing ignore-esi command to enable the aggregation device to ignore ESI validity check during EVPL instance load balancing.

Example

# Disable a device from checking ESI validity when EVPL instance load balancing is performed.

<HUAWEI> system-view
[~HUAWEI] evpl instance 1
[*HUAWEI-evpl1] load-balancing ignore-esi