local-route redirect ipv6 recursive-lookup ip (BGP-IPv6-flow address family view)

Function

The local-route redirect ipv6 recursive-lookup ip command configures a static BGP IPv6 Flow Specification route on a device to redirect traffic to a specified IPv6 next hop.

The undo local-route redirect ipv6 recursive-lookup ip command restores the default configuration.

By default, a static BGP IPv6 Flow Specification route cannot be used to redirect traffic to a specified IPv6 next hop.

Format

local-route redirect ipv6 recursive-lookup ip

undo local-route redirect ipv6 recursive-lookup ip

Parameters

None

Views

BGP-IPv6-flow address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

In a static BGP IPv6 Flow Specification scenario, both the local-route redirect ipv6 recursive-lookup ip and apply redirect ipv6 commands must be run so that traffic can be redirected to a specified IPv6 next hop.

Example

# Configure a static BGP IPv6 Flow Specification route on a device to redirect traffic to a specified IPv6 next hop.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] ipv6-family flow
[*HUAWEI-bgp-af-ipv6-flow] local-route redirect ipv6 recursive-lookup ip