policy (LSP ping test instance)

Format

policy { policy-name policyname | endpoint-ip endpointip color colorid | binding-sid bsid }

undo policy

undo policy { policy-name policyname | endpoint-ip endpointip color colorid | binding-sid bsid }

Parameters

Parameter	Description	Value
policy-name policyname	Specifies the name of an SR-MPLS TE policy.	The value is a string of 1 to 31 case-sensitive characters. It cannot contain spaces.
endpoint-ip endpointip	Specifies the endpoint IP address of an SR-MPLS TE policy.	The value is in dotted decimal notation.
color colorid	Specifies the color ID of an SR-MPLS TE policy.	The value is an integer ranging from 0 to 4294967295.
binding-sid bsid	Specifies the ID of a segment bound to an SR-MPLS TE policy.	The value is an integer ranging from 16 to 1048575.

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

An LSP ping test instance monitors the connectivity of an SR-MPLS TE policy tunnel. You can perform the following operation as required:

To configure the name of an SR-MPLS TE policy for an NQA LSP test instance, run the policy policy-name command.
To configure the ID of a segment bound to an SR-MPLS TE policy for an NQA LSP test instance, run the policy binding-sid command.
To configure an endpoint IP address and color ID for an NQA LSP test instance, run the policy endpoint-ip color command.

Prerequisites

The lsp-type srte-policy command has been run.

Example

# Set a color ID to 12 for a test instance named user test.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type lspping
[*HUAWEI-nqa-user-test] lsp-type srte-policy
[*HUAWEI-nqa-user-test] policy endpoint-ip 10.1.1.2 color 12

# Set a binding segment ID to 22 for a test instance named user test.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type lspping
[*HUAWEI-nqa-user-test] lsp-type srte-policy
[*HUAWEI-nqa-user-test] policy binding-sid 22

# Set the name of an SR-MPLS TE Policy to p1 for a test instance named user test.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type lspping
[*HUAWEI-nqa-user-test] lsp-type srte-policy
[*HUAWEI-nqa-user-test] policy policy-name p1