remote-fec ldp (LSP trace test instance)

Function

The remote-fec ldp command configures an IP address and mask for a remote LDP FEC in a LSP trace test instance.

The undo remote-fec ldp command restores the default configuration.

By default, no IP address or mask is configured for a remote LDP FEC.

Format

remote-fec ldp remoteIpAddr remoteMaskLen

undo remote-fec ldp

Parameters

Parameter	Description	Value
remoteIpAddr	Specifies the IP address of a remote LDP FEC.	The value is in dotted decimal notation.
remoteMaskLen	Specifies a mask for the IP address of a remote LDP FEC.	The value is an integer ranging from 0 to 32.

Parameter

Description

Value

remoteIpAddr

Specifies the IP address of a remote LDP FEC.

The value is in dotted decimal notation.

remoteMaskLen

Specifies a mask for the IP address of a remote LDP FEC.

The value is an integer ranging from 0 to 32.

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

In an SR-MPLS BE and LDP interworking scenario, SR-MPLS BE and LDP services are configured on the local and remote devices, respectively. If the remote device does not support interworking with the SR-MPLS BE service, the local device initiates LDP diagnosis to the remote device. You must run the remote-fec ldp command on the local device to configure an IP address and mask for a remote LDP FEC to ensure normal interworking.

Example

# Configure an IP address and mask for a remote LDP FEC.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type lsptrace
[*HUAWEI-nqa-user-test] lsp-type srbe
[*HUAWEI-nqa-user-test] remote-fec ldp 1.1.1.1 32