packet-priority

Function

The packet-priority command sets an 802.1p priority for Y.1731 and 802.1ag packets in an MA.

The undo packet-priority command restores the default 802.1p priority.

By default, the 802.1p priority is 7 for Y.1731 and 802.1ag packets in an MA.

Format

packet-priority priority

undo packet-priority

Parameters

Parameter	Description	Value
priority	Sets an 802.1p priority for Y.1731 and 802.1ag packets.	The value is an integer ranging from 0 to 7. A larger value indicates a higher priority. The default value is 7.

Parameter

Description

Value

priority

Sets an 802.1p priority for Y.1731 and 802.1ag packets.

The value is an integer ranging from 0 to 7. A larger value indicates a higher priority. The default value is 7.

Views

MA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	write

Usage Guidelines

Usage Scenario

Packets with different 802.1p priorities are transmitted with different priorities. To change the priority of transmitting Y.1731 and 802.1ag packets, run the packet-priority command to set an 802.1p priority for the Y.1731 and 802.1ag packets.

Prerequisites

An MD and an MA have been configured using the cfm md and ma commands, respectively.

Example

# Set the 802.1p priority to 3 for Y.1731 and 802.1ag packets in an MA.

<HUAWEI> system-view
[~HUAWEI] cfm enable
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] ma ma1
[*HUAWEI-md-md1-ma-ma1] packet-priority 3