mep

Function

The mep command specifies the maintenance association end point (MEP) ID for an NQA test instance.

The undo mep command deletes the MEP ID for an NQA test instance.

By default, the MEP ID for an NQA test instance is 0.

Format

mep mep-id mep-id

undo mep

Parameters

Parameter	Description	Value
mep-id mep-id	Specifies the MEP ID for an NQA test instance.	The value is an integer ranging from 1 to 8191.

Parameter

Description

Value

mep-id mep-id

Specifies the MEP ID for an NQA test instance.

The value is an integer ranging from 1 to 8191.

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

A MAC ping test is performed between a MEP and a Merge Point (MP) to detect network connectivity between the two nodes. The test is initiated by the MEP and the destination node can be either a MEP or a MIP with the same level as the MEP, no matter whether the two nodes are in the same maintenance association (MA). Be sure to specify the local MEP ID before starting a MAC ping test.

NOTE:

Before you specify the mep-id <mep-id>parameter, ensure that an MEP has been created using the mep mep-id command.
The mep command applies only to MAC ping tests.</mep-id>

Example

# Specify the MEP ID for a MAC ping test instance as 1.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance admin user
[*HUAWEI-nqa-admin-user] test-type macping
[*HUAWEI-nqa-admin-user] mep mep-id 1