if-match l2vni

Function

The if-match l2vni command configures a matching rule based on a Layer 2 VNI list.

The undo if-match l2vni command cancels the configuration.

By default, no matching rule based on a Layer 2 VNI list is configured.

Format

if-match l2vni [ l2vni-list-name ]

undo if-match l2vni [ l2vni-list-name ]

Parameters

Parameter	Description	Value
l2vni-list-name	Specifies the name of a Layer 2 VNI list. If l2vni-list-name is not specified, a route is matched if only it carries Layer 2 VNI information.	The value is a string of 1 to 63 case-sensitive characters. It cannot contain spaces.

Parameter

Description

Value

l2vni-list-name

Specifies the name of a Layer 2 VNI list. If l2vni-list-name is not specified, a route is matched if only it carries Layer 2 VNI information.

The value is a string of 1 to 63 case-sensitive characters. It cannot contain spaces.

Views

Route-policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
route-base	write

Usage Guidelines

Usage Scenario

To configure a matching rule based on a Layer 2 VNI list, run the if-match l2vni command.

Run the route-policy command to configure a route-policy or enter the view of an existing route-policy.
A route-policy may consist of multiple nodes, and the relationship among these nodes is OR. The system matches routes against the nodes in ascending order of node IDs. If a route matches a node in the route-policy, the route is not matched against the next node.
Each node comprises a set of if-match and applyclauses. The if-match clauses define matching rules that are based on route attributes. The relationship among if-match clauses of the same node that are based on different route attributes is AND. Specifically, a route matches a node only when it meets all the if-match clauses of the node. The relationship among if-match clauses of the same node that are based on the same route attribute is OR; the system matches routes against the if-match clauses in order; if a route matches an if-match clause, the route matches the route-policy, and the system no longer matches the route against the rest if-match clauses. For example, the if-match community-filter 1 and if-match as-path-filter 1 configurations in node 10 are based on different route attributes. Therefore, the relationship among if-match clauses of this node is AND. The if-match community-filter 1 and if-match community-filter 2 configurations in node 20 are both based on the community attribute. Therefore, the relationship among if-match clauses of this node is OR. The apply clauses specify actions. If a route matches a node, the apply clauses set route attributes for the route.

Prerequisites

A VNI list has been created using the filter-list vni command.

Precautions

If the if-match l2vni command is run more than once, the latest configuration overrides the previous one.

Example

# Configure a matching rule based on a Layer 2 VNI list.

<HUAWEI> system-view
[~HUAWEI] filter-list vni abc
[*HUAWEI-vni-list-abc] quit
[*HUAWEI] route-policy policy permit node 10
[*HUAWEI-route-policy] if-match l2vni abc