match-type ipv6 qos-local-id enable

Function

The match-type ipv6 qos-local-id enable command enables the IPv6 QoS local ID matching mode.

The undo match-type ipv6 qos-local-id enable command disables the IPv6 QoS local ID matching mode.

By default, the IPv6 QoS local ID matching mode is not enabled.

Format

match-type ipv6 qos-local-id enable

undo match-type ipv6 qos-local-id enable

Parameters

None

Views

Traffic policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

The rule based on the IPv6 QoS local ID cannot be configured in a common traffic policy. To allow a rule based on the IPv6 QoS local ID to be used in a traffic policy, enable the IPv6 QoS local ID matching mode. You can run the match-type ipv6 qos-local-id enable command to enable the IPv6 QoS local ID matching mode.

Precautions

This command can be configured only in the traffic policy where no traffic behavior is specified for a traffic classifier.

After the match-type ipv6 qos-local-id enable command is executed in a traffic policy, the traffic policy no longer supports IPv6 priority-based (DSCP, ToS, precedence) rules.

Example

# Define the traffic policy named p1 and enable the IPv6 QoS local ID matching mode in the traffic policy.

<HUAWEI> system-view
[~HUAWEI] traffic policy p1
[*HUAWEI-trafficpolicy-p1] match-type ipv6 qos-local-id enable