multicast ipv6 routing-enable (VPN instance IPv6 address family view)

Function

The multicast ipv6 routing-enable command enables IPv6 multicast.

The undo multicast ipv6 routing-enable command restores the default configuration.

By default, IPv6 multicast is not enabled. If IPv6 multicast is not enabled, the Router cannot forward IPv6 multicast packets.

Format

multicast ipv6 routing-enable

undo multicast ipv6 routing-enable

Parameters

None

Views

VPN instance IPv6 address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mcast-base	write

Usage Guidelines

Usage Scenario

Other IPv6 multicast-related commands can be run only after the IPv6 multicast function is enabled.

Precautions

Running the undo multicast ipv6 routing-enable command will clear all IPv6 multicast configurations and terminate the running IPv6 multicast services. To restore the IPv6 multicast services, you need to reconfigure the deleted commands.

Example

# Enable IPv6 multicast.

<HUAWEI> system-view
[~HUAWEI] ip vpn-instance abcde
[*HUAWEI-vpn-instance-abcde] ipv6-family
[*HUAWEI-vpn-instance-abcde-af-ipv6] route-distinguisher 200:200
[*HUAWEI-vpn-instance-abcde-af-ipv6] multicast ipv6 routing-enable