multicast longest-match

Function

The multicast longest-match command selects the Reverse Path Forwarding (RPF) route based on the longest matching rule.

The undo multicast longest-match command restores the default configuration.

By default, the route with the highest preference is selected as the RPF route.

multicast longest-match

undo multicast longest-match

None

System view

2: Configuration level

Task Name	Operations
mcast-base	write

Usage Scenario

When multiple optimal unicast routes exist, the RPF route is selected according to the following rules:

By default, the route with the highest priority is selected as the RPF route.
If the multicast longest-match command is used, the route with the longest mask is selected as the RPF route.
If the multicast load-splitting command is used, multicast load splitting is performed among multiple optimal unicast routes.

# Select routes according to the longest match in the public network instance.

<HUAWEI> system-view
[~HUAWEI] multicast routing-enable
[*HUAWEI] multicast longest-match