multicast ipv6 global limit pim sm

Function

The multicast ipv6 global limit pim sm command sets a limit on the number of global IPv6 PIM entries.

The undo multicast ipv6 global limit pim sm command restores the default configuration.

By default, no limit is set on the number of global IPv6 PIM entries.

Format

multicast ipv6 global limit pim sm { star-group-number | source-group-number } limit-count6 [ threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value ]

undo multicast ipv6 global limit pim sm { star-group-number | source-group-number }

Parameters

Parameter	Description	Value
star-group-number	Configures the specified limit to take effect for (*, G) multicast entries.	-
source-group-number	Configures the specified limit to take effect for (S, G) multicast entries.	-
limit-count6	Specifies a limit on the number of PIM entries.	The value is an integer ranging from 1 to 16384.
threshold-alarm	threshold-alarm.	-
upper-limit upper-limit-value	Sets an alarm trigger threshold, in percentage. An alarm is generated when the percentage ratio of created PIM entries to limit-count reaches upper-limit-value. Setting upper-limit-value to a value greater than 95% is not recommended.	The value is an integer ranging from 1 to 100. The default value is 80.
lower-limit lower-limit-value	Sets an alarm clear threshold, in percentage. An alarm is cleared when the percentage ratio of created PIM entries to limit-count falls below lower-limit-value. lower-limit-value must be less than upper-limit-value. To prevent alarms from being frequently generated and cleared due to route flapping, setting lower-limit-value to a value at least 10 less than upper-limit-value is recommended.	The value is an integer ranging from 1 to 100. The default value is 70.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mcast-base	write

Usage Guidelines

Usage Scenario

To set a limit on the number of PIM entries on the device, run the multicast ipv6 global limit pim sm command.

Configuration Impact

After the specified limit is reached, new entries cannot be created, and the PIM_1.3.6.1.4.1.2011.5.25.149.4.0.23 routeExceed alarm is generated. After the specified limit is reached, new (*, G) and (S, G) entries can be manually added, and ASM share-group entries for Rosen MVPN can be created.
If upper-limit upper-limit-value is set, the PIM_1.3.6.1.4.1.2011.5.25.149.4.0.21 routeThresholdExceed alarm is generated when the percentage ratio of created PIM entries to the specified limit reaches upper-limit-value.

Example

# Set the limit to 2000 for PIM (*, G) entries, alarm trigger threshold to 80%, and alarm clear threshold to 70%.

<HUAWEI> system-view
[~HUAWEI] multicast ipv6 global limit pim sm star-group-number 2000 threshold-alarm upper-limit 80 lower-limit 70

# Set the limit to 1000 for PIM (S, G) entries.

<HUAWEI> system-view
[~HUAWEI] multicast ipv6 global limit pim sm source-group-number 1000