senderid-tlv-type

Function

The senderid-tlv-type command configures the type of the sender ID TLV in a CFM packet.

The undo senderid-tlv-type command restores the default type of the sender ID TLV in a CFM packet.

The default type of the sender ID TLV is defer.

Format

senderid-tlv-type { { chassis | chassis-manage } [ chassis-subtype { mac-address | locally-assigned } ] | defer | manage | none }

undo senderid-tlv-type

Parameters

Parameter	Description	Value
chassis	Indicates that a CFM packet contains the chassis ID.	-
chassis-manage	Indicates that a CFM packet contains the chassis ID and management address.	-
chassis-subtype	Indicates that a CFM packet contains the chassis ID subtype.	-
mac-address	Indicates that a CFM packet contains the MAC address.	-
locally-assigned	Indicates that a CFM packet contains the locally assigned.	-
defer	Indicates that the content of the sender ID TLV is determined by the MD object.	-
manage	Indicates that a CFM packet contains the management address.	-
none	Indicates that a CFM packet does not contain the type of the sender ID TLV.	-

Views

MD view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	write

Usage Guidelines

Usage Scenario

The senderid-tlv-type command can be used only on the device running IEEE Standard 802.1ag-2007.

You can run the senderid-tlv-type command to configure the type of the sender ID TLV in a CFM packet in the MD view.

Prerequisites

Run cfm md command to create an MD.

Example

# Set the type of the sender ID TLV to manage.

<HUAWEI> system-view
[~HUAWEI] cfm enable
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] senderid-tlv-type manage