mep alarm rdi disable

Format

mep mep-id mep-id alarm rdi disable

undo mep mep-id mep-id alarm rdi disable

Parameters

Parameter	Description	Value
mep-id mep-id	Specifies the ID of a MEP that generates an alarm. The ID identifies a MEP. The ID of each MEP on a device in the same MA, VLAN, or VSI must be unique.	The value is an integer ranging from 1 to 8191.

Parameter

Description

Value

mep-id mep-id

Specifies the ID of a MEP that generates an alarm. The ID identifies a MEP. The ID of each MEP on a device in the same MA, VLAN, or VSI must be unique.

The value is an integer ranging from 1 to 8191.

Views

MA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	write

Usage Guidelines

Usage Scenario

When an NMS maintains multiple MEPs, the NMS provides MEP-based alarm control to prevent massive RDI and AIS alarms from being reported. To alleviate the burden for the NMS and device to process massive alarms, run the mep alarm disable command to disable the alarm reporting function.

Prerequisites

1.An MD has been created using the cfm md command.

2.An MA has been created using the ma command.

3.A MEP has been created using the mep mep-id command.

Example

# Disable the RDI alarm reporting function on MEP 1 in the MA named ma1 of the MD named md1.

<HUAWEI> system-view
[~HUAWEI] vlan 2
[*HUAWEI-vlan2] quit
[*HUAWEI] cfm enable
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] ma ma1
[*HUAWEI-md-md1-ma-ma1] map vlan 2
[*HUAWEI-md-md1-ma-ma1] mep mep-id 1 vlan
[*HUAWEI-md-md1-ma-ma1] mep mep-id 1 alarm rdi disable