mep ccm-send enable

Function

The mep ccm-send enable command enables a MEP in an MA to send CCMs.

The undo mep ccm-send enable command disables a MEP in an MA from sending CCMs.

By default, a MEP is disabled from sending CCMs.

Format

mep ccm-send [ mep-id mep-id ] enable

undo mep ccm-send [ mep-id mep-id ] enable

Parameters

Parameter	Description	Value
mep-id mep-id	Specifies the ID of a MEP. If this parameter is not specified, all MEPs in an MA are enabled to send CCMs or disabled from sending CCMs.	The value is an integer ranging from 1 to 8191

Parameter

Description

Value

mep-id mep-id

Specifies the ID of a MEP. If this parameter is not specified, all MEPs in an MA are enabled to send CCMs or disabled from sending CCMs.

The value is an integer ranging from 1 to 8191

Views

MA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	write

Usage Guidelines

Usage Scenario

You can run the mep ccm-send enable command to enable the MEP to send CCMs after a MEP is configured using the mep mep-id command.

Prerequisites

An MD, MA, and MEP have been configured using the cfm md, ma, and mep mep-id commands, respectively.

Example

# Enable MEP 10 in the MA named ma1 to send CCMs.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] interface GigabitEthernet 0/1/1
[*HUAWEI-GigabitEthernet0/1/1] undo shutdown
[*HUAWEI-GigabitEthernet0/1/1] mpls l2vc 2.2.2.2 100
[*HUAWEI-GigabitEthernet0/1/1] quit
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] ma ma1
[*HUAWEI-md-md1-ma-ma1] map mpls l2vc 2.2.2.2 100 raw
[*HUAWEI-md-md1-ma-ma1] mep mep-id 1 interface GigabitEthernet0/1/1 inward
[*HUAWEI-md-md1-ma-ma1] mep ccm-send mep-id 1 enable