mld max-response-time

Function

The mld max-response-time command sets a global maximum response time for Multicast Listener Discovery (MLD) Query messages.

The undo mld max-response-time command restores the default value.

By default, the maximum response time for MLD Query messages is 10 seconds.

Format

mld max-response-time interval

undo mld max-response-time

Parameters

Parameter	Description	Value
interval	Specifies the maximum response time for MLD Query messages.	The value is an integer ranging from 1 to 125, in seconds.

Parameter

Description

Value

interval

Specifies the maximum response time for MLD Query messages.

The value is an integer ranging from 1 to 125, in seconds.

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 200GE sub-interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE sub-interface view, GE interface view, GE electrical interface view, Global VE sub-interface view, Loopback interface view, PW-VE sub-interface view, VE sub-interface view, VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
igmp	write

Usage Guidelines

Usage Scenario

The maximum response time determines the period during which the device quickly checks whether there are directly connected members in the LAN.

If the maximum response time is configured in both the interface view and the MLD view, the system prefers the value configured in the interface view.

Example

# Set the maximum response time to 8 seconds on GE 0/1/0.

<HUAWEI> system-view
[~HUAWEI] multicast ipv6 routing-enable
[*HUAWEI] interface GigabitEthernet 0/1/0
[*HUAWEI-GigabitEthernet0/1/0] ipv6 enable
[*HUAWEI-GigabitEthernet0/1/0] mld max-response-time 8