max-response-time (MLD view)

Function

The max-response-time command sets a global maximum response time of Multicast Listener Discovery (MLD) Query messages.

The undo max-response-time command restores the default value.

By default, the maximum response time for MLD Query messages is 10 seconds.

Format

max-response-time interval

undo max-response-time

Parameters

Parameter	Description	Value
interval	Specifies the maximum response time of MLD Query messages.	The value is an integer ranging from 1 to 125, in seconds.

Parameter

Description

Value

interval

Specifies the maximum response time of MLD Query messages.

The value is an integer ranging from 1 to 125, in seconds.

Views

MLD view, VPN instance MLD view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
igmp	write

Usage Guidelines

Usage Scenario

The function of this command is the same as that of the mld max-response-time command used in the interface view. The system prefers the configuration in the interface view. The configuration in the MLD view is used only when the configuration in the interface view is not done.

Example

# In the MLD view, set the maximum response time of MLD Query messages to 8 seconds.

<HUAWEI> system-view
[~HUAWEI] multicast ipv6 routing-enable
[*HUAWEI] mld
[*HUAWEI-mld] max-response-time 8