monitor vpn-instance peer

Format

monitor vpn-instance vpn-instance-name peer ipv4-address

monitor vpn-instance vpn-instance-name peer ipv6-address

undo monitor vpn-instance vpn-instance-name peer ipv4-address

undo monitor vpn-instance vpn-instance-name peer ipv6-address

Parameters

Parameter	Description	Value
vpn-instance-name	Specifies the name of a VPN instance.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported. In addition, the VPN instance name must not be _public_. When double quotation marks are used around the string, spaces are allowed in the string.
ipv4-address	Specifies the IPv4 address of a BGP peer.	The value is in dotted decimal notation.
ipv6-address	Specifies the IPv6 address of a BGP peer.	The address is a 32-bit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

Parameter

Description

Value

vpn-instance-name

Specifies the name of a VPN instance.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported. In addition, the VPN instance name must not be _public_. When double quotation marks are used around the string, spaces are allowed in the string.

ipv4-address

Specifies the IPv4 address of a BGP peer.

The value is in dotted decimal notation.

ipv6-address

Specifies the IPv6 address of a BGP peer.

The address is a 32-bit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

Views

BMP session view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bmp	write

Usage Guidelines

Usage Scenario

BMP is used to monitor BGP running status of devices in real time, such as the establishment and termination status of BGP peer relationships and route update status. To allow the BGP running status of a specified BGP peer in a specified VPN instance address family to be monitored, run the monitor vpn-instance peer command. After a TCP connection is established between the device and the monitoring server, the device reports BGP running status to the monitoring server, improving network monitoring efficiency.

Follow-up Procedure

Perform either of the following operations as required:

Run the route-mode { { ipv4-family | ipv6-family } unicast | { ipv4-family labeled-unicast } } adj-rib-in { pre-policy | post-policy } command to set the type of RIB-in route (received from a specified peer in a specified VPN instance address family) whose statistics are to be sent by the device to the monitoring server.
Run the route-mode { { ipv4-family | ipv6-family } unicast | { ipv4-family labeled-unicast } } adj-rib-out { pre-policy | post-policy } command to set the type of RIB-out route (to be advertised or already advertised to a specified peer in a specified VPN instance address family) whose statistics are to be sent by the device to the monitoring server.

Example

# Display the BMP-Monitor view and allow the BGP running status of a specified BGP peer in a specified VPN instance address family to be monitored.

<HUAWEI> system-view
[~HUAWEI] ip vpn-instance vpn1
[*HUAWEI-vpn-instance-vpn1] ipv4-family
[*HUAWEI-vpn-instance-vpn1-af-ipv4] route-distinguisher 100:1
[*HUAWEI-vpn-instance-vpn1-af-ipv4] quit
[*HUAWEI-vpn-instance-vpn1] quit
[*HUAWEI] bmp
[*HUAWEI-bmp] bmp-session 10.1.1.1 alias a
[*HUAWEI-bmp-session-10.1.1.1-a] monitor vpn-instance vpn1 peer 10.1.1.1