display service-security binding

Function

The display service-security binding command displays binding information about MPAC policies.

Format

display service-security binding { ipv4 | ipv6 } [ interface { interface-type interface-number | interface-name } [ slot slot-id ] ]

Parameters

Parameter	Description	Value
ipv4	Specifies IPv4 MPAC policies.	-
ipv6	Specifies IPv6 MPAC policies.	-
interface interface-type interface-number	Specifies an interface.	-
slot slot-id	Specifies the slot ID of an interface board. The interface board in this slot must be properly installed.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
hostdefend	read

Usage Guidelines

Usage Scenario

You can run the display service-security binding command to view binding information about MPAC policies.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display binding information about IPv4 MPAC policies on GE 0/1/0.

<HUAWEI> display service-security binding ipv4 interface GigabitEthernet 0/1/0
Interface  : GigabitEthernet0/1/0
Policy Name: A1

# Display binding information about IPv4 MPAC policies on all interfaces.

<HUAWEI> display service-security binding ipv4
Configured  : Global
Policy Name : huawei

Interface  : GigabitEthernet0/1/0
Policy Name: A1

**Table 1** Description of the **display service-security binding** command output
Item	Description
Interface	Name of the interface to which an MPAC policy is applied.
Policy Name	Name of an MPAC policy.
Configured	Global for a globally applied MPAC policy.