reset service-security counters

Function

The reset service-security counters command clears statistics about an MPAC policy.

Format

reset service-security counters { ipv4 | ipv6 } [ security-policy-name ]

Parameters

Parameter	Description	Value
ipv4	Specifies IPv4 MPAC policies.	-
ipv6	Specifies IPv4 MPAC policies.	-
security-policy-name	Specifies the name of an MPAC policy.	The value is a string of 1 to 31 case-sensitive characters without spaces and must start with a letter.

Parameter

Description

Value

ipv4

Specifies IPv4 MPAC policies.

ipv6

Specifies IPv4 MPAC policies.

security-policy-name

Specifies the name of an MPAC policy.

The value is a string of 1 to 31 case-sensitive characters without spaces and must start with a letter.

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ip-stack	execute

Usage Guidelines

Usage Scenario

When excessive MPAC policy statistics are stored or new statistics are queried, you can run the reset service-security counters command to clear the existing statistics.

To clear statistics about a specified IPv4 or IPv6 MPAC policy, specify the security-policy-name parameter. To clear statistics about all MPAC policies, do not specify the security-policy-name parameter.

Precautions

After the reset service-security counters command is run, the original statistics are cleared and cannot be displayed.

Example

# Display statistics about the IPv4 MPAC policy named huawei.

<HUAWEI> reset service-security counters ipv4 huawei