step (service-sec-policy view)

Function

The step command configures the step for rules in an MPAC policy.

The undo step command restores the default setting.

By default, the step is set to 5.

Format

step step

undo step

Parameters

Parameter	Description	Value
step	Specifies the step for rules in the MPAC policy.	The value is an integer ranging from 1 to 20.

Parameter

Description

Value

step

Specifies the step for rules in the MPAC policy.

The value is an integer ranging from 1 to 20.

Views

Service6-sec-policy view, Service-sec-policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
hostdefend	write

Usage Guidelines

Usage Scenario

A rule step is the difference between two automatically allocated rule numbers. If the step is set to 5, the system automatically allocates rule numbers 5, 10, 15, 20, and so on.

Using a rule step, you can maintain the rules and add new rules conveniently.

Prerequisites

An MPAC policy has been created using the service-security policy command.

Configuration Impact

After the step is configured for rules in an MPAC policy, the numbers of all rules are re-organized based on the new step.

Precautions

The step command configuration triggers the change of rule numbers but not the rule priorities.

Example

# Set the step to 10 for rules in an MPAC policy.

<HUAWEI> system-view
[~HUAWEI] service-security policy ipv4 huawei
[*HUAWEI-service-sec-huawei] step 10