mpls ldp auto-config

Function

The mpls ldp auto-config command enables MPLS LDP automatic configuration on all IS-IS interfaces which can establish IS-IS neighbor relationships in a specified IS-IS process.

The undo mpls ldp auto-config command disables this function.

By default, MPLS LDP automatic configuration is disabled on IS-IS interfaces.

Format

mpls ldp auto-config

undo mpls ldp auto-config

Parameters

None

Views

IS-IS view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
isis	write

Usage Guidelines

Usage Scenario

To configure MPLS LDP on an IS-IS interface, you need to enable MPLS LDP globally first and then on the interface. If a large number of interfaces need MPLS LDP, configure them one by one, which is time-consuming and prone to configuration errors. To address this issue, run the mpls ldp auto-config command in the IS-IS view. After the mpls ldp auto-config command is run, MPLS LDP is enabled automatically on all IS-IS-capable interfaces, which simplifies configurations. If you want to disable MPLS LDP automatic configuration, run the undo mpls ldp auto-config command.

Prerequisites

MPLS LDP has been enabled globally using the mpls ldp command in the system view, and an IS-IS process has been created using the isis command.

Precautions

After the mpls ldp auto-config command is run for an IS-IS process, MPLS LDP is enabled automatically on all interfaces which can establish IS-IS neighbor relationships in the IS-IS process. If you want to disable MPLS LDP from an interface, run the isis mpls ldp auto-config disable command in the interface view.

Example

# Enable MPLS LDP automatic configuration on all IS-IS interfaces which can establish IS-IS neighbor relationships in IS-IS process 1.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls ldp
[*HUAWEI-mpls-ldp] quit
[*HUAWEI] isis 1
[*HUAWEI-isis-1] mpls ldp auto-config