mpls-hqos flow-queue

Function

The mpls-hqos flow-queue command configures scheduling parameters of the SQ in the QoS profile for the VPN.

The undo mpls-hqos command cancels the configuration.

By default, no SQ scheduling parameters are configured in the QoS profile for the VPN.

Format

undo mpls-hqos

mpls-hqos flow-queue flow-queue-name [ { user-group-queue group-queue-name } | { service-template template-name } ] ^*

Parameters

Parameter	Description	Value
user-group-queue group-queue-name	Specifies the name of a user group queue.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported.
service-template template-name	Specifies the service profile name.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported.
flow-queue flow-queue-name	Specifies the flow queue profile.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

Parameter

Description

Value

user-group-queue group-queue-name

Specifies the name of a user group queue.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

service-template template-name

Specifies the service profile name.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

flow-queue flow-queue-name

Specifies the flow queue profile.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

Views

QoS profile view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

To configure the flow queue profile, service profile and user group queue parameters, in a QoS profile for the VPN, run the mpls-hqos flow-queue command.

Prerequisites

A QoS profile and specified flow queue profile must have been created before this command is run.

Precautions

The service profile, and user group queue parameters must have been configured before being applied to this command.

The service profile used in this command must have been configured globally but not based on a board.

This command is mutually exclusive with the user-queue and car commands in the QoS profile.

Example

# Configure scheduling parameters of the SQ in the QoS profile named p1 for the VPN.

<HUAWEI> system-view
[~HUAWEI] flow-queue queue1
[*HUAWEI-flow-queue-template-queue1] quit
[*HUAWEI] qos-profile p1
[*HUAWEI-qos-profile-p1] mpls-hqos flow-queue queue1