The mpls multistep separate enable command enables the separation of the private and public networks for MPLS services.
The undo mpls multistep separate enable command disables the separation of the private and public networks for MPLS services.
By default, this function is disabled.
Usage Scenario
The mpls multistep separate enable command is used when both VPLS and MPLS services are configured. After this command is run, a FES table is generated on the forwarding plane to support the separation of the private and public networks for MPLS services. This function helps improve convergence performance if a tunnel fails.
Prerequisites
VPLS private and public network decoupling has been enabled using the mpls vpls convergence separate enable command.
Configuration Impact
Packet loss occurs temporarily when the mpls multistep separate enable command or its undo form is run.